Finisar Corporation is a global technology leader in optical communications components and subsystems. These products enable high-speed voice, video and data communications for networking, storage, wireless, and cable TV applications. For 25 years, Finisar has provided critical breakthroughs in optics technologies and has supplied system manufacturers with the production volumes needed to meet the exploding demand for network bandwidth. Finisar's industry-leading optical products include transceivers/transponders, active cables, WSS ROADMs, RF-over-Fiber, amplifiers, optical instruments, and active and passive components.
Finisar's FTLX1772M3BCL 10Gb/s Pluggable SFP+ transceivers are compliant with SFF-8431 and SFF-8432, and support 10G SONET, SDH, OTN, IEEE 802.3ae, 8x/10x Fibre Channel and 6.144G/9.83 CPRI. Finisar's FTLX1772M3BCL transceivers have higher optical transmit power and better receiver sensitivity than 1310nm 10GBASE-LR and OC-192 SR-1 transceivers, and they support an optical link budget of 17dB, to compensate for the higher fiber attenuation loss at 1310nm over 40km of G.652 single mode fiber. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1772M3BCL transceivers utilize internal transmitter and receiver re-timer IC's for SONET/SDH jitter compliance and to enhance host cards' signal integrity.
Finisar FCBG110SD1Cxx 10Gb/s SFPwire® SFP+ active optical cables are designed for use in 10-Gigabit Ethernet links. They are electrically compliant with SFF-84311, and the mechanical SFP+ plug is compatible with SFF-84322. SFPwire is SFI limiting and no host electrical transmitter pre-emphasis is required. No host electrical receiver linear equalization is required either. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver.
Finistar FTLD10CE1C 100Gbps Optical Transceiver delivers up to 100 Gigabit per second links over multimode fiber with a multirate capability of 1.06 to 10.5Gb/s per channel. The optical transceiver is compliant with the CSP Specification, IEEE 802.3ba 100GBASE-SR10, and CPPI interfaces. The transceiver offers 12 full-duplex channels, a hot pluggable CXP form factor, and a maximum link length of 100m on OM3 multimode fiber.
Finisar FTLX1871M3BCL 10Gb/s, 80km Single Mode, Multi-Rate SFP+ Fiber Optic Transceiver is an Enhanced Small Form Factor Pluggable SFP+ transceiver designed for use in 10-Gigabit multi-rate links of up to 80km of G.652 single mode fiber. It is compliant with SFF-84311, SFF-84322, and G.959.1 P1L1-2D2, and supports SONET OC-192, SDH STM-64, 10G Ethernet ZR, and 10G Fibre Channel. Finisar's FTLX1871M3BCL transceiver uses internal clock and data recovery (CDR) ICs for the transmitter and the receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant.
Finisar FTLX1472M3BCL Single Mode, Multi-Rate SFP+ Transceiver is a 10Gb/s Enhanced Small Form Factor Pluggable (SFP+) transceiver designed for use in 10-Gigabit, multi-rate links up to maximum of 10km over G.652 single mode fiber. It is compliant with SFF-8431, SFF-8432, ITU-T G.693 VSR2000-2R1, SDH I-64.1 and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae 10GBASE-LR/LW and 10G Fiber Channel 1200-SM-LL-L (up to 10km). Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1472M3BCL transceiver utilizes internal clock and date recovery (CDR) units on the transmitter and the receiver chains for SONET/SDH jitter compliance and to enhance the signal integrity on XFP XFI-like host card designs. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038.
Finisar FTLX8573D3BTL Multimode SFP+ Datacom Transceiver is an Industrial Temperature 850nm 10Gb/s SFP+ transceiver, designed for use in 10-Gigabit Ethernet links over multimode fiber. It is compliant with SFF-8431, SFF-8432, IEEE 802.3ae 10GBASE-SR/SW, and 10G Fiber Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8573D3BTL is a "limiting module", as it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC and Finisar Application Note AN-2038.
Finisar FTL410QE2C QSFP+ Gen2 Optical Transceiver Module is designed for use in 40 Gigabit per second links over multimode fiber. This transceiver module is compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR43 for 100 meter links on OM3 fiber. It is also compatible with 10G Base SR for fan-out applications (QSFP+ to 4 SFP+). Digital diagnostics functions are available via an I²C interface, as specified by the QSFP+ MSA. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and Finisar Application Note AN-2038.
Finisar FTLF8519P3BNL Short-Wavelength SFP Transceiver is a Small Form Factor Pluggable (SFP) transceiver, compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). This SFP transceiver offers the lowest power SFP for Gigabit Ethernet, with 30 percent power savings. The FTLF8519P3BNL is simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC- PI-2 Rev. 5.0. It is RoHS compliant and lead-free per Directive 2002/95/EC and Finisar Application Note AN-2038. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.