ELECTRONIC ASSEMBLY is a leading designer and manufacturer of LCD modules, including voltmeters, frequency counters, timers, and graphics kits, as well as interface modules for dot-matrix and graphics displays. ELECTRONIC ASSEMBLY's products meet the highest quality standards for reliability and high functionality.
Electronic Assembly OLED Displays with 4- & 8-bit Controllers are suitable for industrial applications, thanks to an extended operating temperature range of -40 to +80ºC. These displays maintain full contrast and an extremely fast response time of 10µs, even down to -40ºC. They also require no contrast adjustment and have no limitation in viewing angle at temperature extremes. Thanks to the new patented OLED technology, the displays reach a lifetime of 14k hours, even at the maximum operating temperature of +80ºC (half brightness)--and the probable lifetime at room temperature is over 100,000 hours. These OLED displays provide all important character sets as standard, including English, Japanese, European (8 bit interface only), and Cyrillic. With the well-known 4-bit and 8-bit parallel interface, the new OLED displays are similar to the HD44780 standard. The OLED technology provides a contrast ratio of minimum 2000:1, due to its real black background and active technology. Character display counts range from 2x8 to 4x20 and single supply operation is available at 5V and 3.3V without modification.
ELECTRONIC ASSEMBLY 7" TFT Displays with Intelligence have the ability to be up and running immediately, providing full functionality from the first minute. These displays require a single 5V power supply and an RS-232, I²C, or SPI interface. ELECTRONIC ASSEMBLY 7" TFT Displays with Intelligence offer a 7" TFT screen with 800x480 resolution and a white LED backlight. The EA eDIPTFT70-A is the basic TFT display, while the EA eDIPTFT70-ATP includes a touch panel. All character sets and control/graphic functions for the display and the touch panel are available immediately. There is also a starter kit/eval board--the EA EVALeDIPTFT32, and a 7" mounting bezel--the EA 0FP801-70SW.
ELECTRONIC ASSEMBLY has expanded its line of Embedded TFT Displays with Intelligence. The EA eDIPTFT32-A offers a 3.2" TFT screen with 320x240 dots and a white LED backlight, and the EA eDIPTFT32-ATP is the same with a touch panel. The expansion also includes the EA EVALeDIPTFT32 starter kit/demo board, and the EA 0FP322-32SW mounting bezel.Also available: ELECTRONIC ASSEMBLY Embedded 4.3" TFT Display with Intelligence
ELECTRONIC ASSEMBLY EA DOG Series LCD display
modules represent the industry's first displays that run on 3.3V
systems without auxiliary power. These ELECTRONIC ASSEMBLY LCD modules
can also be used on traditional 5V systems and are designed for compact
hand-held devices. The ELECTRONIC ASSEMBLY DOGXL module is a
160x104-pixel graphics display featuring a UC1610 controller
for SPI and I²C interface. The DOGL is a 128x64-pixel graphics
display that is extremely compact (68x51mm) with a large viewing area of
64x36mm. The DOGM includes 128x64-pixel and 132x132-pixel
options. DOGM modules are extremely compact (55x46 mm) with a
large viewing area of 51x31 mm. The DOGS module features a
high-contrast 102x64-pixel LCD supertwist display with 10µm DOT GAP.
The ELECTRONIC ASSEMBLY LCD TextDisplay for RS-232C includes frontal bezel and LED backlight and is available in a variety of different sizes from 1x8" up to 16x40". ELECTRONIC ASSEMBLY LCD TextDisplay devices come with either yellow/green LED backlights or low power white LED backlights. These ELECTRONIC ASSEMBLY serial displays also feature high contrast supertwist LCD and frontal bezel with antiglare glass. The TextDisplay serial display devices have a supply voltage of +5V or optional +9.35V. Transfer rate can be set by jumper on 300, 1200, 2400, or 9600 Baud. All cursor controls are performed automatically.
Electronic Assembly's EA eDIP graphic displays are equipped with industry-leading integrated intelligence, a variety of integrated fonts, and a range of sophisticated graphics functions. These Electronic Assembly devices come ready to operate with an operating voltage of 5V, are controlled by RS-232, SPI, or I2C interfaces, and require no programming of character sets and graphics routines. The devices are available with an integrated touch panel and are equipped with LED lighting with adjustable dimming.
The ELECTRONIC ASSEMBLY embedded 4.3" TFT display with built-in intelligence provides full functionality right out of the box. All character sets and control/graphic functions for this ELECTRONIC ASSEMBLY display are immediately available. This TFT display includes multiple built-in fonts and built-in features that let designers create the screen layout they need with just a few simple commands. This ELECTRONIC ASSEMBLY device features 4MB on board Flash for fonts, pictures, animation, and macros, and RS-232, I2C-BUS, and SPI-BUS interfaces on board.Also available: ELECTRONIC ASSEMBLY Embedded 3.2" TFT Displays with Intelligence