Contact Mouser (USA)  (800) 346-6873     |     Feedback         
 |    Change Country  Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
Home » Applications & Technologies » Low Power Electronics
Applications & Technologies
Low Power MCU

Few if any decisions can have more impact on the power profile of a new design than the choice of an MCU. Choosing between new “ultra-low-power” MCUs can be confusing. While low-power is important it’s low energy that really counts—which ultimately makes the choice of an MCU application specific. Here’s what to look for:

First, there is no commonly agreed upon definition of ultra-low-power. Thanks to Ohm’s Law reducing the core voltage results in a dramatic reduction in power; processor cores running at 0.9V are becoming increasingly common. Shrinking line geometries have enabled higher device densities but at the expense of higher leakage; in low-power sensor applications, where the MCU spends most of its time in sleep mode, leakage current may contribute more to overall energy consumption than a high active current, possibly making an older 90-nm MCU a better choice than the latest 20 nm design.

» View Featured MCUs for Low Power

Power Mangement ICs
Low Power Power Mangement ICs

Engineers have numerous tricks to minimize power consumption in solid-state devices: static and dynamic process temperature compensation; power gating; clock gating; reduced core voltage; voltage islands; dynamic voltage and frequency scaling; and a variety of power-down modes. Managing all these controls has gotten so complex that it’s generated a whole category of power management ICs (PMICs), some of which are customized for a particular MCU.

Almost all leading MCU vendors offer PMICs designed to work in conjunction with their processors. These PMICs are complete power management solutions that typically contain multiple independent voltage regulators that meet the supply requirements of a particular MCU family. PMICs may include linear (LDO) and switching regulators (buck/boost/or both) and controllers. They can also handle voltage sequencing, current limiting, and surge protection. Many are programmable.

As MCUs become more complex, power management is increasingly handled on-chip. This is a distinct advantage when different portions of the chip need to move quickly between numerous power-down modes. Dynamic voltage and frequency scaling is a complex function that is more easily handled on-chip.

» View Featured Power Management for Low Power

RF Devices
Low Power RF

With seemingly every portable device going wireless, the need for low-power wireless design has never been greater. While there are no simple answers, there are a number of things it’s important to keep in mind.

All things being equal, the less time spent transmitting RF the less power will be required. Low-power wireless sensor nodes wake up for a few microseconds each second, poll for data, transmit it in a short burst, and go back to sleep. Protocols such as Wi-Fi (802.11) that are constantly polling for streaming data consume a lot more power than say Bluetooth (802.15.1), which can be in active, sniff, hold, or park mode.

Low-power wireless protocols such as Bluetooth Low Energy, Texas Instruments’ simpliciTI, and Microchip’s MiWi use small software stacks designed for low data rate applications such as wireless sensor nodes. They’re designed for point-to-point communications but can also work in star networks. ZigBee, while low energy, can operate in ad hoc mesh networks where a central node may be unreliable or even lacking.

» View Featured RF Products for Low Power

Analog Devices
Low Power Analog

Low-power and analog at first glance don’t seem to go together. Class A op-amps consume correspondingly more power as the input voltage rises; and achieving a good SNR may result in relatively high current drain.

There are various ways around the problem: First replace Class A op-amps with rail-to-rail common mode Class AB op-amps, which are biased at small currents and thus dissipate less quiescent power. In doing so be careful that you can still provide sufficient gain and output power, maximizing gain while preserving an acceptable bandwidth and slew rate.

Digitize the signal as soon as possible. You can often use digital filtering to compensate for a weak analog signal that might otherwise be too close to the noise floor.

» View Featured Analog Products for Low Power

Memory ICs
Low Power Memory

While most of the low-power buzz has centered on MCUs, memory is often the real power hog.

Flash memory is very popular for temporary data storage, both on- and off-chip. Flash is fast, with one typical 16-Mbit multi-purpose flash memory chip displaying read access times of 70-90 nsec. While the 3 μA standby current is low, this spikes to 9 mA in Write mode. Moving a lot of data to flash memory can take a big bite out of a power budget. If data is moving to and from off-chip flash, the number of wait states needed to keep memory in sync with the MCU can have a similar impact. Basically, choose an MCU with as much on-chip flash as you’re likely to need. If possible choose one that can also handle memory accesses by peripherals without waking the CPU.

SRAM is widely used for cache memory in high-speed applications. It’s fast, non-volatile—at least while powered up—and relatively low power. Asynchronous DRAM is cheaper (1T vs. 6T) and faster, but it needs to be constantly refreshed, which argues against using it much in applications where the processor will be in standby-mode most of the time.

» View Featured Memory Products for Low Power

Interface Devices
Low Power Interface

Data interfaces are often dictated by the system into which a device will be connected—automotive applications may have a CAN, LIN, FlexRay, or MOST interface; computers, USB or Ethernet; other embedded devices may communicate by I2C, UART, SPI, or a host of other protocols. The environment dictates the architecture; the power requirement is a secondary consideration.

But this needn’t always be the case. Protocols that continually poll other devices on the bus will draw far more power than those that wait for a signal or event. USB 2.0, for example, continually polls every device on the network to see if any one of them wants to send data; a USB 3.0 controller, on the other hand, waits for a device to raise an “attention needed” flag before waking up and acknowledging the request; other devices on the bus remain in a quiescent state while the host and device complete their transaction. USB 3.0 also implements link power management, which further reduces power consumption.

» View Featured Interface Products for Low Power

Learn More About Intel Quark SoC X1000 Processors
Intel Quark SoC
X1000 Processors

With its security and manageability features the Quark SoC X1000 Processors are ideally suited for the Internet of Things (IoT) and for the next wave of cost-effective intelligent connected devices.
Learn More About Intel Quark SoC X1000 Processors
Learn More About TI TPS7A4701 RF LDO Voltage Regulators
Voltage Regulators

Created for powering noise sensitive precision analog circuits with the need for high input voltage along with accurate and repeatable measurements like those found in high performance analog operational amplifiers.
Learn More About TI TPS7A4701 RF LDO Voltage Regulators
Learn More About ADI AD7091R Ultralow Power 12-Bit ADCs
ADI AD7091R Ultralow
Power 12-Bit ADCs

An ADC that offers ultralow power consumption while achieving fast throughput rates with a wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 7MHz.
Learn More About ADI AD7091R Ultralow Power 12-Bit ADCs
Learn More About NXP 74AXP Low Voltage Si-Gate CMOS Logic
NXP 74AXP Low Voltage
Si-Gate CMOS Logic

Si-gate CMOS devices using leading low threshold process technology and next generation packaging technology to create extremely small functions that support the trend to very low operating voltages.
Learn More About NXP 74AXP Low Voltage Si-Gate CMOS Logic
Learn More About Bluegiga BLE Modules & USB Dongle
Bluegiga BLE Modules
& USB Dongle

Bluegiga Bluetooth Low Energy Modules & Dongles are single mode devices that integrate all features for a Bluetooth Smart application, including Bluetooth radio, software stack, and GATT-based profiles.
Learn More About Bluegiga BLE Modules & USB Dongle
Learn More About Silicon Labs EFM32® Zero Gecko 32-bit MCUs
Silicon Labs EFM®32 Zero
Gecko 32-bit MCUs

Zero Gecko 32-bit Microcontrollers are the latest addition to the Silicon Labs Gecko portfolio of ultra low power and energy friendly 32-bit MCUs and are regarded as the world’s most energy friendly microcontrollers.
Learn More About Silicon Labs EFM32® Zero Gecko 32-bit MCUs
More Featured Products
Maxim Integrated - MAX44264 Ultra-Small Op AmpsLearn More
Microchip Technology - nanoWatt XLP™ TechnologyLearn More
NXP - LPC800 Cortex-M0+ 32-Bit MCUsLearn More
RF Modules
Panasonic - Bluetooth RF ModulesLearn More