Contact Mouser (USA)  (800) 346-6873     |     Feedback        
View Cart     |     Change Location  USD
United States United States

Please confirm your currency selection:

US Dollars
NEDA Authorized Analog Devices, Inc. Distributor
Analog Devices
   
 
View all Analog Devices Products View Analog Devices NEWESTPRODUCTS

Innovation, performance, and excellence are the cultural pillars on which Analog Devices (ADI) has built one of the longest standing, highest growth companies within the technology sector. Acknowledged industry-wide as the world leader in data conversion and signal conditioning technology, Analog Devices serves over 60,000 customers, representing virtually all types of electronic equipment. Analog Devices is headquartered in Norwood, Massachusetts, with design and manufacturing facilities throughout the world. Analog Devices is included in the S&P 500 Index.

 
Analog Devices AD9364 Integrated RF Transceiver Analog Devices ADDI7013 CCD Signal Processor Analog Devices ADA4077-2 Dual Amplifier
 
ADI High Speed Data Converters
 
Analog Devices Instrumentation & Measurement

Analog Devices Product Line

Analog Devices New Products

Added 08/2014 Analog Devices Inc. ADE7932/ADE7933 Isolated, Sigma Delta ADCs Learn More
Added 08/2014 Analog Devices Inc. AD8451 Precision Analog Front-End & Controller Learn More
Added 08/2014 Analog Devices Inc. ADIS16488 Tactical Grade Ten Degrees of Freedom Inertial Sensors Learn More
Added 07/2014 Analog Devices Inc. AD9652 Evaluation Board Learn More
Added 07/2014 Analog Devices Inc. AD9144 Quad DAC Evaluation Board Learn More
Added 07/2014 Analog Devices Inc. EVAL-ADM3260EBZ Evaluation Board Learn More
Added 07/2014 Analog Devices Inc. AD7989-1/AD7989-5 18-Bit PulSAR ADCs Learn More
Added 07/2014 Analog Devices Inc. ADE7913/ADE7912 Isolated, Sigma Delta ADCs with SPI Learn More
Added 07/2014 Analog Devices Inc. ADSP-BF51xF16 Blackfin Embedded Processors Learn More
Added 07/2014 Analog Devices Inc. EVAL-AD5693RSDZ Evaluation Board Learn More
Added 07/2014 Analog Devices Inc. AD9625 12-Bit ADC Evaluation Boards Learn More
Added 07/2014 Analog Devices Inc. AD9554 Clock Translator Learn More
Added 07/2014 Analog Devices Inc. AD7091R-2/AD7091R-4/AD7091R-8 Ultralow Power 12-Bit ADCs Learn More
Added 07/2014 Analog Devices Inc. ADP5051 Quad Buck Regulators Learn More
Added 07/2014 Analog Devices Inc. ADE7978 3-Phase Metrology IC for Polyphase Shunt Meters Learn More
Added 06/2014 Analog Devices Inc. ADP1051 Digital Controller with a PMBus Interface Learn More
Added 06/2014 Analog Devices Inc. ADA4304-3/-4 Single-Ended Active RF Splitters Learn More
Added 06/2014 Analog Devices Inc. AD9680 14-Bit, 1GSPS Dual ADC Learn More
Added 05/2014 Analog Devices Inc. AD9625 12-Bit, 2.0GSPS ADCs Learn More
Added 05/2014 Analog Devices Inc. ADM8321 Supervisory Circuit Learn More
Added 05/2014 Analog Devices Inc. AD7902 Analog to Digital Converter Learn More
Added 05/2014 Analog Devices Inc. AD5691, AD5692, & AD5693 nanoDAC+ DACs Learn More
Added 05/2014 Analog Devices Inc. ADP1972 Buck or Boost PWM Controller Learn More
Added 05/2014 Analog Devices Inc. ADN2913 Continuous Rate Clock and Data Recovery IC w/Integrated Limiting Amp/EQ Learn More
Added 05/2014 Analog Devices Inc. ADuCM350 16-Bit Precision Low Power Meter On A Chip Learn More
Added 05/2014 Analog Devices Inc. AD9652 16-Bit Analog-to-Digital Converter (ADC) Learn More
Added 04/2014 Analog Devices Inc. ADM8323/ADM8324 Supervisory Circuits Learn More
Added 03/2014 Analog Devices Inc. ADL5303 Data Converter Learn More
Added 03/2014 Analog Devices Inc. AD9249 Analog to Digital Converter Learn More
Added 03/2014 Analog Devices Inc. ADI AD9361 RF Agile Transceiver Learn More
Added 03/2014 Analog Devices Inc. ADuM124x Dual-Channel Digital Isolators Learn More
Added 03/2014 Analog Devices Inc. AD8418A Bidirectional, Current Sense Amplifier Learn More
Added 03/2014 Analog Devices Inc. ADM83xx Supervisory Circuits Learn More
Added 03/2014 Analog Devices Inc. AD-DPGIOZ Data Pattern Generator/Receiver Learn More
Added 03/2014 Analog Devices Inc. ADuM7223 Isolated Precision Half-Bridge Driver Learn More
Added 03/2014 Analog Devices Inc. ADAU1452 SigmaDSP Digital Audio Processor Learn More
Added 02/2014 Analog Devices Inc. AD9364 Integrated RF Transceiver Learn More
Added 02/2014 Analog Devices Inc. ADM7151 RF Linear Regulator Learn More
Added 02/2014 Analog Devices Inc. ADL5562 3.3GHz RF/IF Differential Amplifier Learn More
Added 12/2013 Analog Devices Inc. AD8418 Current Sense AMP Learn More
Added 12/2013 Analog Devices Inc. ADV7281-M/ADV7282-M Video Decoders Learn More
Added 12/2013 Analog Devices Inc. ADDI7013 CCD Signal Processor Learn More
Added 11/2013 Analog Devices Inc. ADuM144x Quad-Channel Digital Isolators Learn More
Added 11/2013 Analog Devices Inc. AD9963 12-Bit MxFE® Converters Learn More
Added 11/2013 Analog Devices Inc. ADL5565 6GHz Differential Amplifier Learn More
Added 11/2013 Analog Devices Inc. AD9142 Dual, 16-Bit DAC Learn More
Added 11/2013 Analog Devices Inc. AD5687/AD5687R Dual 12-Bit nanoDAC+™ Learn More
Added 10/2013 Analog Devices Inc. ADA466x Precision CMOS Operational Amplifiers Learn More
Added 10/2013 Analog Devices Inc. AD8229HDZ Instrumentation Amplifier Learn More
Added 10/2013 Analog Devices Inc. ADM3485E Low Power Data Transceiver Learn More
Added 09/2013 Analog Devices Inc. ADP5033 Dual Buck Regulators Learn More
Added 09/2013 Analog Devices Inc. AD5689, AD5689R Dual 16-Bit nanoDAC+™ Learn More
Added 09/2013 Analog Devices Inc. ADL5511 RF RMS Detector Learn More
Added 08/2013 Analog Devices Inc. AD8422 Instrumentation Amplifier Learn More
Added 08/2013 Analog Devices Inc. AD8338 18MHz Variable Gain Amplifier Learn More
Added 08/2013 Analog Devices Inc. ADP5037 800mA Buck Regulators Learn More
Added 08/2013 Analog Devices Inc. ADL5544 / ADL5545 RF/IF Gain Block Amplifiers Learn More
Added 08/2013 Analog Devices Inc. ADP5050 Integrated Power Solution Learn More
Added 08/2013 Analog Devices Inc. EVAL-AD7980SDZ Evaluation Kit Learn More
Added 08/2013 Analog Devices Inc. ADMP411 High SPL Microphone Learn More
Added 07/2013 Analog Devices Inc. ADXRS646-EP Yaw Rate Gyroscope Learn More
Added 07/2013 Analog Devices Inc. ADP196 High-Side Load Switch Learn More
Added 07/2013 Analog Devices Inc. AD9683 14-Bit ADC Learn More
Added 07/2013 Analog Devices Inc. AD7091R Ultralow Power 12-Bit ADC Learn More
Added 07/2013 Analog Devices Inc. AD8232 Heart Rate Monitor Front End Learn More
Added 07/2013 Analog Devices Inc. ADIS16488 iSensor® Inertial Sensor Learn More
Added 07/2013 Analog Devices Inc. AD9525 Low Jitter Clock Generator Learn More
Added 06/2013 Analog Devices Inc. ADuM3190 Isolated Error Amplifier Learn More
Added 06/2013 Analog Devices Inc. High Speed Low Power Rail-to-Rail Output Amplifiers Learn More
Added 06/2013 Analog Devices Inc. ADMP521 Ultra-Low Noise Microphone Learn More
Added 06/2013 Analog Devices Inc. AD7176-2 Sigma-Delta ADC Learn More
Added 06/2013 Analog Devices Inc. AD8375 Ultralow Distortion IF VGA Learn More
Added 06/2013 Analog Devices Inc. ADP2441 Synchronous, Step-Down DC-DC Regulator Learn More
Added 06/2013 Analog Devices Inc. ADN469xE M-LVDS Transceivers Learn More
Added 06/2013 Analog Devices Inc. ADAS3022 Data Acquisition IC Learn More
Added 06/2013 Analog Devices Inc. ADA4084-2 30V Dual Op Amp Learn More
Added 06/2013 Analog Devices Inc. AD8428 Instrumentation Amplifier Learn More
Added 06/2013 Analog Devices Inc. ADA4638-1 30V Precision Amplifier Learn More
Added 05/2013 Analog Devices Inc. ADRF6701 400-1250MHz Quadrature Modulator Learn More
Added 05/2013 Analog Devices Inc. AD8479 Precision Difference Amplifier Learn More
Added 05/2013 Analog Devices Inc. AD9557/8 Clock Translators Learn More
Added 05/2013 Analog Devices Inc. ADuM4160 USB Digital Isolator Learn More
Added 05/2013 Analog Devices Inc. AD511x Digital Potentiometers Learn More
Added 05/2013 Analog Devices Inc. ADA4940 Fully Differential ADC Drivers Learn More
Added 05/2013 Analog Devices Inc. AD9250 Dual 14-bit ADC Learn More
Added 05/2013 Analog Devices Inc. AD5780 Digital-to-Analog Converters Learn More
Added 05/2013 Analog Devices Inc. ADG52xx/54xx High Voltage Latch-Up Switches and Multiplexers Learn More
Added 05/2013 Analog Devices Inc. AD512x/514x Nonvolatile DigiPOTs Learn More
Added 05/2013 Analog Devices Inc. ADF41020 18GHz Microwave PLL Synthesizer Learn More
Added 07/2012 Analog Devices Inc. ADA4077 High Precision Amplifier Learn More
 
Analog Devices AD9683 14-Bit ADC

Analog Devices Featured Products

Analog Devices AD8479 Precision Difference Amplifier

Analog Devices AD8479 Precision Difference Amplifier is a difference amplifier with a very high input common-mode voltage range. The AD8479 is a precision device that allows the user to accurately measure differential signals in the presence of high common-mode voltages up to ±600V. The AD8479 can replace costly isolation amplifiers in applications that do not require galvanic isolation. The device operates over a ±600V common-mode voltage range and has inputs that are protected from common-mode or differential mode transients up to ±600V. The AD8479 has low offset voltage, low offset voltage drift, low gain drift, low common-mode rejection drift, and excellent common-mode rejection ratio (CMRR) over a wide frequency range.

Analog Devices ADuCM350 16-Bit Precision Low Power Meter On A Chip

Analog Devices ADuCM350 16-Bit Precision Low Power Meter On A Chip is a complete, coin cell powered, high precision, meter-on-chip for portable device applications for applications such as point-of-care diagnostics and body-worn devices for monitoring vital signs. The ADuCM350 is designed for high precision amperometric, voltametric, and impedometric measurement capabilities. The ADuCM350 analog front end (AFE) features a 16-bit, precision, 160kSPS analog-to-digital converter (ADC); 0.17% precision voltage reference; 12-bit, no missing codes digital-to-analog converter (DAC); and a reconfigurable ultralow leakage switch matrix. The ADuCM350 also includes an ARM® Cortex-M3-based processor, memory, and all I/O connectivity to support portable meters with display, USB communication, and active sensors.

Analog Devices AD9652 16-Bit Analog-to-Digital Converter (ADC)

Analog Devices AD9652 16-Bit Analog-to-Digital Converter (ADC) is a dual ADC with sampling speeds of up to 310MSPS. It is designed to support demanding, high speed signal processing applications that require exceptional dynamic range over a wide input frequency range (up to 465MHz). Its exceptional low noise floor of −157.6dBFS and large signal spurious-free dynamic range (SFDR) performance (exceeding 85dBFS, typical) allows low level signals to be resolved in the presence of large signals. The dual ADC cores feature a multistage, pipelined architecture with integrated output error correction logic. A high performance on-chip buffer and internal voltage reference simplify the inter-face to external driving circuitry while preserving the exceptional performance of the ADC.

Analog Devices AD9144 Quad DAC Evaluation Board

Analog Devices AD9144 evaluation board features the AD9144 quad, 16-bit, 2.8GSPS, TxDAC+ digital-to-analog converter. It provides a maximum sample rate of 2.8GSPS, permitting a multicarrier generation up to the Nyquist frequency. The DAC outputs are optimized to interface seamlessly with the ADRF672x analog quadrature modulators (AQMs). A 4-wire serial port interface provides for programming/readback of many internal parameters. Full-scale output current can be programmed over a range of 14mA to 26mA. The evaluation board is evaluated with the AD-DPG3 tool. ADI's VisualAnalog™ software package can be used with the AD9144 evaluation board. It combines a powerful set of simulation and data analysis tools with a user-friendly graphical interface that allows designers to customize their input signal and data analysis.

Analog Devices ADP5051 Quad Buck Regulators

Analog Devices ADP5051 integrates four high performance buck regulators and a supervisory circuit with a voltage monitor, a watchdog function, and a manual reset in a 48-lead LFCSP package to meet demanding performance and board space requirements. ADP5051 allows a direct connection to high input voltages up to 15.0V with no preregulators. Channel 1 and Channel 2 provide high-side power MOSFET and low-side MOSFET drivers. In low-side power devices, external NFETs achieve an efficiency optimized solution and deliver a programmable output current of 1.2A, 2.5A, or 4A. The ADP5051 supervisory circuits monitor voltage level. The watchdog timer generates a reset when the WDI does not toggle within a preset timeout period. An optional I²C Interface offers flexible configurations, including adjustable and fixed output voltage, junction temperature overheat warning, low input voltage detection, and dynamic voltage scaling. The design makes the ADP5051 an ideal integrated power solution for small cell base stations, FPGA and processor applications, security & surveillance, and medical applications.

Analog Devices EVAL-ADM3260EBZ Evaluation Board

Analog Devices EVAL-ADM3260EBZ Evaluation Board provides all of the support circuitry required for designers to evaluate the ADM3260 hot swappable dual I²C isolators with integrated DC-to-DC converter. The evaluation board features screw terminals for easy connection, multiple test points for easy node access, knob adjustable isolated DC-to-DC output voltage, and a special layout to minimize electromagnetic interference (EMI).

Analog Devices ADSP-BF51xF16 Blackfin Embedded Processors

Analog Devices ADSP-BF51xF16 Blackfin Embedded Processors are part of the Blackfin® family of products designed to incorporate the Analog Devices/Intel Micro Signal Architecture (MSA). Blackfin processors combine a dual-MAC state-of-the-art signal processing engine, the advantages of a clean, orthogonal RISC-like microprocessor instruction set, and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. By integrating a rich set of industry-leading system peripherals and memory, Blackfin processors are the platform of choice for next-generation applications that require RISC-like programmability, multimedia support, and leading-edge signal processing in one integrated package.

Analog Devices EVAL-AD5693RSDZ Evaluation Board

Analog Devices EVAL-AD5693RSDZ helps designers quickly prototype new AD5693R circuits and reduce design time. AD5693R operates from a single 2.7V to 5.5V supply. EVAL-AD5693RSDZ incorporates an internal 2.5V on-board reference to offer an output voltage span of 2.5V or 5V. The evaluation board interfaces to the USB port via the SDP board. Software is available with the evaluation board to enable the designer to easily program the AD5693R. The EVAL-AD5693RSDZ evaluation board requires the EVAL-SDP-CB1Z or EVAL-SDP-CS1Z board.

Analog Devices AD9554 Clock Translator

Analog Devices AD9554 is a low loop bandwidth clock translator designed to provide jitter cleanup and synchronization for many systems, including synchronous optical networks (SONET/SDH). AD9554 generates an output clock synchronized to up to four external input references. The digital PLL (DPLL) allows for reduction of input time jitter or phase noise associated with the external references. The digitally controlled loop and holdover circuitry of the AD9554 continuously generates a low jitter output clock even when all reference inputs have failed. AD9554 operates over an industrial temperature range of −40°C to +85°C and is ideal for network synchronization, cleanup of reference clock jitter, SONET/SDH clocks up to OC-192, including FEC, Stratum 3 holdover, jitter cleanup, and phase transient control, cable infrastructure, and data communications.

Analog Devices ADP1051 Digital Controller with a PMBus Interface

Analog Devices ADP1051 is an advanced digital controller with a PMBus™ interface targeting high density, high efficiency DC-to-DC power conversion. ADP1051 integrates voltage mode control with high speed, input line feed forward for enhanced transient and improved noise performance. The ADP1051 has six programmable pulse-width modulation (PWM) outputs capable of controlling most high efficiency power supply topologies, with added control of synchronous rectification (SR). The device includes adaptive dead time compensation to improve efficiency over the load range, and programmable light load mode operation, combined with low power consumption, to reduce system standby power losses.

Analog Devices AD9652 Evaluation Board

Analog Devices AD9652 evaluation board is a full-featured development board designed to evaluate the ADI AD9652 dual, 16-bit analog-to-digital converter (ADC). The evaluation board includes SPI interface for setup and control, a balun/transformer or amplifier input drive option, and an on-board LDO regulator needing a single external 6V, 2A dc supply. AD9625 dual ADC AD9652 features sampling speeds of up to 310MSPS and can digitize up to 155MHz of signal bandwidth. This ADI dual ADC provides an analog input bandwidth of 650MHz and is designed to support demanding, high-speed signal processing applications that require exceptional dynamic range over a wide input frequency range. This ADC's exceptional low noise floor of −157.6dBFS and large signal spurious-free dynamic range (SFDR) performance (exceeding 85dBFS, typical) allows low level signals to be resolved in the presence of large signals.

Analog Devices AD9680 14-Bit, 1GSPS Dual ADC

Analog Devices AD9680 14-Bit, 1GSPS Dual Analog-to-Digital Converter is a high-speed device featuring the best noise and dynamic range performance in its class, enabling the trend for direct RF sampling. The breakthrough performance, bandwidth and integrated functionality of ADI's wideband RF data acquisition technology allows for better signal extraction in congested RF environments over a wider bandwidth than ever before. This ADI device has an on-chip buffer and sample-and-hold circuit designed for low power, small size, and ease of use. This device is designed for sampling wide bandwidth analog signals of up to 2GHz.

Analog Devices AD9625 12-Bit, 2.0GSPS ADCs

Analog Devices AD9625 12-Bit, 2.0GSPS Analog-to-Digital Converter (ADC) provides the best noise and dynamic range performance in its class for better receiver sensitivity along with the ability to discern smaller signals in the presence of noise, clutter, blockers, and interferers. This ADI A/D converter is designed for sampling wide bandwidth analog signals up through the 2nd Nyquist zone. AD9625 features a combination of wide input bandwidth, high sampling rate, and excellent linearity that make it ideal for use in ultra-wide band RADAR, wideband front-ends for digital storage oscilloscopes, and data acquisition platforms. The analog input, clock, and SYSREF± signals are differential inputs. The JESD204B-based high-speed serialized outputs are configurable in a variety of one, two, four, six-lane, or eight-lane arrangements. This ADI device is specified over the industrial temperature range of −40°C to +85°C.

Analog Devices AD9680 14-Bit Dual ADC Evaluation Board

Analog Devices AD9680 Evaluation Board is a development tool for the AD9680 dual, 14-bit, 1000MSPS analog-to-digital converter (ADC).  ADI AD9680 ADC is designed for sampling wide bandwidth analog signals of up to 2GHz. The ADC is optimized for wide input bandwidth, high sampling rate, excellent linearity, and low power in a small package. The dual ADC cores feature a multistage, differential pipelined architecture with integrated output error correction logic. Each ADC features wide bandwidth inputs supporting a variety of user-selectable input ranges. An integrated voltage reference eases design considerations. The analog input and clock signals are differential inputs. Each ADC data output is internally connected to two digital down converters. In addition to the DDC blocks, the AD9680 has several functions that simplify the automatic gain control function in a communications receiver.

Analog Devices AD9625 12-Bit ADC Evaluation Boards

Analog Devices AD9625 evaluation boards are development tools for the AD9625 12-bit monolithic sampling analog-to-digital converter (ADC). ADI AD9625 operates at conversion rates up to 2.5GSPS and is designed for sampling wide bandwidth analog signals. AD9625 can be used up to the third Nyquist zones. The ADC's combination of wide input bandwidth, high sampling rate, and excellent linearity is ideal for spectrum analyzers, data acquisition systems, and a wide assortment of military elections applications, such as RADAR and jamming/anti-jamming measures.

Analog Devices ADE7978 3-Phase Metrology IC for Polyphase Shunt Meters

Analog Devices ADE7978 is a high accuracy, 3-phase electrical energy measurement IC with serial interfaces and three flexible pulse outputs. The ADE7978 can interface with up to four ADE7933/ ADE7932 devices. The device incorporates all the signal processing required to perform total (fundamental and harmonic) active, reactive, and apparent energy measurement and rms calculations, as well as fundamental-only active and reactive energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this signal processing. ADE7978 measures the active, reactive, and apparent energy in various 3-phase configurations, such as wye or delta services, with both three and four wires. The device provides system calibration features for each phase, gain calibration, and optional offset correction. Phase compensation is also available, but it is not necessary because the currents are sensed using shunts. The CF1, CF2, and CF3 logic outputs provide a wide selection of power information: total active, reactive, and apparent powers; the sum of the current rms values; and fundamental active and reactive powers.

Analog Devices ADN2913 Continuous Rate Clock and Data Recovery IC w/Integrated Limiting Amp/EQ

Analog Devices ADN2913 Continuous Rate Clock and Data Recovery IC w/Integrated Limiting Amp/EQ offers the receiver functions of quantization, signal level detection, and clock and data recovery for continuous data rates from 6.5Mbps to 8.5Gbps. The ADN2913 automatically locks to all data rates without the need for an external reference clock or programming. ADN2913 jitter performance exceeds all jitter specifications required by SONET/SDH, including jitter transfer, jitter generation, and jitter tolerance. The LOS detection circuit has hysteresis to prevent chatter at the LOS output. In addition, the input signal strength can be read through the I2C registers. The ADN2913 also supports pseudorandom binary sequence (PRBS) generation, bit error detection, and input data rate readback features.

ADI AD5691, AD5692, & AD5693 nanoDAC+ DACs

ADI AD5691, AD5692, & AD5693 nanoDAC+® digital to analog converters are low power, single-channel, 16-/14-/12-bit buffered voltage output DACs. The devices include an enabled by default internal 2.5V reference, offering 2ppm/°C drift. The output span can be programmed to be 0V to VREF or 0V to 2 × VREF. All devices operate from a single 2.7V to 5.5V supply and are guaranteed monotonic by design. The devices are available in a 2.00mm × 2.00mm, 8-lead LFCSP or a 10-lead MSOP. The internal power-on reset circuit ensures that the DAC register is written to zero scale at power-up while the internal output buffer is configured in normal mode. The AD5693R/AD5692R/AD5691R contain a power-down mode that reduces the current consumption of the device to 2μA (maximum) at 5V and provides software selectable output loads. The AD5693R/AD5692R/AD5691R use an I2C interface. Some device options also include an asynchronous RESET pin and a VLOGIC pin, allowing 1.8 V compatibility.

ADI AD7902 Analog to Digital Converter

ADI AD7902 Analog to Digital Converter is a dual 16-bit, successive approximation ADC that operates from a single power supply, VDDx, per ADC. It contains two low power, high speed, 16-bit sampling ADCs and a versatile serial port interface (SPI). On the CNVx rising edge, the AD7902 samples an analog input, IN+, in the range of 0 V to VREF with respect to a ground sense, IN−. The externally applied reference voltage of the REFx pins (VREF) can be set independently from the supply voltage pins, VDDx. The power of the device scales linearly with throughput. Using the SDIx inputs, the SPI-compatible serial interface can also daisy-chain multiple ADCs on a single 3-wire bus and provide an optional busy indicator. It is compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic, using the separate VIOx supplies.

Analog Devices ADIS16488 Tactical Grade Ten Degrees of Freedom Inertial Sensors

Analog Devices ADIS16488 Tactical Grade Ten Degrees of Freedom Inertial Sensors are part of an inertial system designed to provide a simple method for integrating accurate, multiaxis inertial sensing into industrial systems. Each inertial sensor in the ADIS16488A combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, and linear acceleration (gyroscope bias). As a result, each sensor has its own dynamic compensation formulas that provide accurate sensor measurements. Applications include platform stabilization and control, navigation, personnel tracking, instrumentation, and robotics.

Analog Devices ADP1972 Buck or Boost PWM Controller

Analog Device's ADP1972 Buck or Boost PWM Controller is a constant frequency, voltage mode, pulse-width modulation (PWM) controller for buck or boost, dc-to-dc, asynchronous applications. The ADP1972 is designed for use in asynchronous battery testing applications with an external, high voltage field effect transistor (FET), half bridge driver, and an external control device, such as the AD8450. The asynchronous device operates as a buck converter in battery charge mode and operates as a boost converter in recycle mode to recycle energy to the input bus. The ADP1972 high voltage, VIN supply pin can withstand a maximum operating voltage of 60V and reduces the need for additional system supply voltages. The ADP1972 has integrated features such as precision enable, pin selective buck or boost mode operation, internal and external synchronization control with programmable phase shift, programmable maximum duty cycle, and programmable peak hiccup current limit.

Analog Devices ADA4304-3/-4 Single-Ended Active RF Splitters

Analog Devices ADA4304-3/-4 Single-Ended Active RF Splitters are 75Ω active splitters for use in applications where a lossless signal split is required. Typical applications include multituner digital set-top boxes, cable splitter modules, multituners/digital cable ready (DCR) televisions, and home gateways where traditional solutions require discrete passive splitter modules with separate fixed gain amplifiers. The ADA4304-3/-4 are fabricated using the Analog Devices, Inc., proprietary silicon germanium (SiGe), complementary bipolar process, enabling them to achieve very low levels of distortion with a noise figure of 4.6dB. The parts provide low cost alternatives that simplify designs and improve system performance by integrating a signal splitter element and a gain block into a single IC.

Analog Devices ADE7932/ADE7933 Isolated, Sigma Delta ADCs

Analog Devices ADE7932/ADE7933 are isolated, sigma-delta analog-to-digital converters (Σ-Δ ADCs) for polyphase energy metering applications that use shunt current sensors. ADE7932 features two 24-bit ADCs, while the ADE7933 features three 24-bit ADCs. One channel is dedicated to measuring the voltage across the shunt when a shunt is used for current sensing. This channel has a signal-to-noise ratio (SNR) of 67dB over a 3.3kHz signal bandwidth. Up to two additional channels are dedicated to measuring voltages, which are usually sensed using resistor dividers. These channels provide an SNR of 75dB over a 3.3kHz signal bandwidth. One voltage channel can be used to measure the temperature of the die via an internal sensor. Based on the Analog Devices, Inc., iCoupler® technology, the DC-to-DC converter provides the regulated power required by the first stage of the ADCs at a 3.3V input supply. The ADE7933/ADE7932 eliminate the need for an external DC-to-DC isolation block. The iCoupler chip scale transformer technology is used to isolate the logic signals between the first and second stages of the ADC. The result is a small form factor, total isolation solution.

Analog Devices AD7989-1/AD7989-5 18-Bit PulSAR ADCs

Analog Devices AD7989-1/AD7989-5 18-Bit PulSAR ADCs are 18-bit, successive approximation, analog-to-digital converters (ADC) that operate from a single VDD power supply. AD7989-1/AD7989-5 contain a low power, high speed, 18-bit sampling ADC and a versatile serial interface port. On the CNV rising edge, the AD7989-1/AD7989-5 sample the voltage difference between the IN+ and IN− pins. The voltages on these pins usually swing in opposite phases between 0 V and VREF. The reference voltage, REF, is applied externally and can be set independent of the supply voltage, VDD. Its power scales linearly with throughput. With the SPI-compatible serial interface AD7989-1/AD7989-5 has the ability, using the SDI input, to daisy-chain several ADCs on a single 3-wire bus. The offering is compatible with 1.8V, 2.5V, 3V, and 5V logic, using the separate VIO supply. Available in a 10-lead MSOP or a 10-lead LFCSP with operation specified from −40°C to +85°C, AD7989-1/AD7989-5 18-Bit PulSAR ADCs are ideal for battery-powered equipment, data acquisition systems, medical instruments, and seismic data acquisition systems.

Analog Devices AD7091R-2/AD7091R-4/AD7091R-8 Ultralow Power 12-Bit ADCs

Analog Devices AD7091R-2/AD7091R-4/AD7091R-8 family features multichannel 12-bit, ultralow power, successive approximation analog-to-converters (ADC) available in two, four, or eight analog input channel options. The AD7091R-2/AD7091R-4/AD7091R-8 operate from a single 2.7V to 5.25V power supply and can achieve a sampling rate of 1 mega samples per second (MSPS). The AD7091R-2/ AD7091R-4/AD7091R-8 contain a wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 1.5 MHz. The AD7091R-2/AD7091R-4/AD7091R-8 also feature an on-chip conversion clock, an on-chip accurate 2.5V reference, and a high speed serial interface. 

Analog Devices ADE7913/ADE7912 Isolated, Sigma Delta ADCs with SPI

Analog Devices ADE7913/ADE7912 are fully isolated analog-to-digital converters (ADCs) designed for a variety of applications such as shunt-based polyphase meters, power quality monitoring, solar inverters, process monitoring and protective devices. The devices incorporate Analog Devices' patented iCoupler® and isoPower® technologies to implement isolated signal transfer and DC-to-DC power conversion across a 5kV-rated insulation barrier. This integration enables the use of shunt resistor sensing elements instead of current transformers (CTs), thereby providing immunity to magnetic field interference and tampering. The use of shunts instead of CTs also reduces system cost and size.

Analog Devices ADL5303 Data Converter

Analog Devices ADL5303 Data Converter is a monolithic logarithmic detector optimized to measure low frequency signal power in fiber optic systems. Thanks to a proprietary design and precise laser trimming, ADL5303 delivers a high degree of accuracy in a large measurement range.The ADL5303 requires only a single positive supply, VPS, of 5V. When using low supply voltages, designers can alter the log slope to fit the available span. Low quiescent current and chip disable facilitate use in battery-operated applications. The ADL5303 Data Converter is especially well-suited for high accuracy optical power measurement, wide range baseband log compression, and versatile detector for APC loop applications.

Analog Devices AD9364 Integrated RF Transceiver

Analog Devices AD9364 is a high performance, highly integrated radio frequency (RF) Agile Transceiver™ designed for use in 3G and 4G base station applications. The device combines an RF front end with a flexible mixed-signal baseband section and integrated frequency synthesizers. The transmitter uses a direct conversion architecture that achieves high modulation accuracy with ultra low noise. The on-board transmit (Tx) power monitor can be used as a power detector, enabling highly accurate Tx power measurements. The fully integrated phase-locked loops (PLLs) provide low power fractional-N frequency synthesis for all Rx and Tx channels. All VCO and loop filter components are integrated. The core of the AD9364 can be powered directly from a 1.3 V regulator. The IC is controlled via a standard 4-wire serial port and four real-time input control pins. Comprehensive power-down modes are included to minimize power consumption during normal use. Analog Devices AD9364 wideband capability make it ideal for a broad range of transceiver applications.

ADI AD9361 RF Agile Transceiver

ADI AD9361 is a high performance, highly integrated RF Agile Transceiver™. Its programmability and wideband capability make it ideal for a broad range of transceiver applications. The device combines an RF front end with a flexible mixed-signal baseband section and integrated frequency synthesizers, simplifying design-in by providing a configurable digital interface to a processor. The AD9361 operates in the 70 MHz to 6.0 GHz range, covering most licensed and unlicensed bands. Channel bandwidths from less than 200 kHz to 56 MHz are supported. The AD9361 is packaged in a 10 mm × 10 mm, 144-ball chip scale package ball grid array (CSP_BGA).

ADI AD9249 Analog to Digital Converter

ADI AD9249 Analog to Digital Converter is 16-channel, 14-bit, 65 MSPS ADC with an on-chip sample-and-hold circuit that is designed for low cost, low power, small size, and ease of use. The device operates at a conversion rate of up to 65 MSPS and is optimized for outstanding dynamic performance and low power in applications where a small package size is critical. The ADC requires a single 1.8 V power supply and an LVPECL-/ CMOS-/LVDS-compatible sample rate clock for full performance operation. No external reference or driver components are required for many applications. The AD9249 automatically multiplies the sample rate clock for the appropriate LVDS serial data rate. Data clock outputs (DCO±1, DCO±2) for capturing data on the output and frame clock outputs (FCO±1, FCO±2) for signaling a new output byte are provided. Individual channel power-down is supported, and the device typically consumes less than 2 mW when all channels are disabled. The ADC contains several features designed to maximize flexibility and minimize system cost, such as programmable clock and data alignment and programmable digital test pattern generation. The AD9249 is available in an RoHS-compliant, 144-ball CSP-BGA. It is specified over the industrial temperature range of −40°C to +85°C.

ADI ADAU1452 SigmaDSP Digital Audio Processor

ADI ADAU1452 SigmaDSP Digital Audio Processor  is automotive-qualified and far exceeds the digital signal processing capabilities of earlier SigmaDSP® devices. Its restructured hardware architecture is optimized for efficient audio processing. The audio processing algorithms are realized in sample-by-sample and block-by-block paradigms, which can both be executed simultaneously in a signal processing flow created using the graphical programming tool, SigmaStudio™. The new digital signal processor (DSP) core architecture enables some types of audio processing algorithms to be executed using significantly fewer instructions than were required on previous SigmaDSP generations, leading to vastly improved code efficiency.

Analog Devices ADuM7223 Isolated Precision Half-Bridge Driver

Analog Devices' ADuM7223 is a 4.0A isolated, half-bridge gate driver designed using Analog Devices, Inc., iCoupler® technology to provide independent and isolated high-side and low-side outputs. Combining high speed CMOS and monolithic transformer technology, these isolation components offer outstanding performance characteristics superior to alternatives such as the combination of pulse transformers and non-isolated gate drivers. Featuring two independent isolation channels, ADuM7223 operates with an input supply ranging from 3.0V to 5.5V, providing compatibility with lower voltage systems. The outputs operate in a wide range from 4.5V to 18V with three output voltage versions available. The 5mm × 5mm, LGA package provides 565V operating voltage from input to output and 700V from output to output. By integrating the isolator and driver in a single package, propagation delay is a maximum of only 64ns, and the propagation skew from channel to channel is a maximum of only 12ns at 12V. Compared to gate drivers using high voltage level translation methodologies,  ADuM7223 offers the benefit of true, galvanic isolation between the input and each output. As a result, this gate driver provides reliable control over the switching characteristics of IGBT/MOSFET configurations over a wide range of positive or negative switching voltages.

Analog Devices AD-DPGIOZ Data Pattern Generator/Receiver

Analog Devices AD-DPGIOZ Data Pattern Generator/Receiver provides pattern generation and receiving capabilities to compliment several evaluation boards from Analog Devices. DPGI/O connects to a PC over USB, and allows a user to download a vector from their PC into the DPGI/O’s internal memory, or to receive a vector from an evaluation board and transfer it to the PC.

Analog Devices AD9139 16-Bit DAC

Analog Devices AD9139 DAC is a 16-bit, high dynamic range digital-to-analog converter (DAC) that provides a sample rate of 1600 MSPS, permitting a multicarrier generation up to the Nyquist frequency. The AD9139 TxDAC+® includes features optimized for wideband communication applications, including 1× and 2× interpolation, a delay locked loop (DLL) powered high speed interface, sample error detection, and parity detection. A 3-wire serial port interface provides for the programming/readback of many internal parameters. A full-scale output current can be programmed over a range of 9 mA up to 33 mA. The AD9139 is ideal for wideband communications, transmit diversity/MIMO, instrumentation, and automated test equipment.

Analog Devices AD8418A Bidirectional, Current Sense Amplifier

Analog Devices AD8418A Bidirectional, Current Sense Amplifier is a high voltage, high resolution current shunt amplifier featuring an initial gain of 20 V/V, with a maximum ±0.2% gain error. Qualified for automotive applications, the device provides breakthrough performance throughout the −40°C to +125°C operating temperature range. The EMI filters and patented circuitry enable output accuracy with pulse-width modulation (PWM) type input common-mode voltages. AD8418A offers a typical input offset voltage of  ±200 μV and an excellent input common-mode rejection ratio of 86 dB, dc to 10 kHz from −2 V to +70 V. The zero drift core leads to a typical offset drift of 0.1 μV/°C throughout the operating temperature and the common-mode voltage range. The design makes the AD8418A Current Sense Amplifier ideal for performing bidirectional current measurements across a shunt resistor in a variety of automotive and industrial applications including motor control, power management, and solenoid control.


Analog Devices ADuM124x Dual-Channel Digital Isolators

Analog Devices ADuM124x Dual-Channel Digital Isolators are micropower digital isolators that are based on the Analog Devices iCoupler® technology. Combining high speed CMOS and monolithic air core transformer technologies, these isolation components provide outstanding performance characteristics superior to alternatives, such as optocoupler devices, yet consume extremely low power. This series of dual, 3.75kVrms digital isolation devices operate with supplies as low as 2.25V and typically consume a minimal current of less than 6μA per channel at data rates below 20kbps, a fraction of the power of comparable isolators at comparable data rates (up to 2Mbps). In addition, all models provide low pulse width distortion (<8ns) and an input glitch filter for extraneous noise disturbance protection. All models operate with an independent supply voltage on either side (between 2.25V and 3.6V), providing compatibility with lower voltage systems and enabling voltage level translation functionality across the isolation barrier. In the absence of input power, the products default to a predetermined output logic state: the ADuM1240 and ADuM1241 default to high output, and the ADuM1245 and ADuM1246 default to low output.

Analog Devices ADM8323/ADM8324 Supervisory Circuits

Analog Devices ADM8323/ADM8324 Supervisory Circuits monitor power supply voltage levels and code execution integrity in microprocessor-based systems. An on-chip watchdog timer checks for activity within a preset timeout window. A reset signal can also be asserted by an external push-button switch through a manual reset input. The RESET output is either push-pull (ADM8323) or open-drain (ADM8324). A watchdog failure results in a low output on the RESET pin. A failure can be triggered either by a fast watchdog error (watchdog pulses too close together) or by a slow watchdog error (no watchdog pulse within the timeout period). This effectively gives a window in which to observe the watchdog pulse. The watchdog timeout is measured from the last falling edge of the watchdog input (WDI). The ADM8323/ADM8324 are available in a 5-lead SOT-23 package and typically consume only 10μA, making them suitable for use in low power portable applications.

Analog Devices ADM8321 Supervisory Circuit

Analog Devices ADM8321 Supervisory Circuit monitors power supply voltage levels and code execution integrity in microprocessor-based systems. As well as providing power-on reset signals, an on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. A reset signal can also be asserted by an external push-button switch through a manual reset input. It features a watchdog input, output stage configuration (open-drain and push-pull). This device comes with a reset threshold of 3.0V, a reset timeout of 1ms (minimum) and a timeout of 1.6sec (typical). It comes in a 5-lead SOT-23 package and typically consumes only 10μA, making it suitable for use in low power, portable applications.

Analog Devices ADM7151 RF Linear Regulator

Analog Devices ADM7151 RF Linear Regulator is a low dropout (LDO) linear regulator that operates from 4.5V to 16V and provides up to 800mA of output current. Using an advanced proprietary architecture, it provides high power supply rejection (>90dB from 1kHz to 1MHz), ultra-low noise, and excellent line and load transient response with a 10μF ceramic output capacitor. The output voltage can be set to any voltage between 1.5V and 4.0V with two resistors. The ADM7151 regulator output noise is 1.0μV rms from 100Hz to 100kHz, and the noise spectral density is 1.7nV/√Hz from 10kHz to 1MHz. The ADM7151 is a very compact solution, and also provides excellent thermal performance for applications requiring up to 800 mA of output current in a small, low profile footprint.

Analog Devices ADV7281-M/ADV7282-M Video Decoders

Analog Devices ADV7281-M/ADV7282-M video decoders are versatile one-chip, multiformat decoders that automatically detect standard analog baseband video signals compatible with worldwide NTSC, PAL, and SECAM standards in the form of composite, S-Video, and component video. The ADV7281-M/ADV7282-M converts the analog video signals into a YCrCb 4:2:2 video data stream that is compatible with the 8-bit ITU-R BT.656 interface standard. The ADV7281-M/ADV7282-M convert the analog video signals into an 8-bit YCrCb 4:2:2 video data stream that is output over a mobile industry processor interface (MIPI) CSI-2 interface. The analog video inputs of the ADV7281-M/ADV7282-M accept single-ended, pseudo differential, and fully differential signals. The ADV7282-M contains a deinterlacer (I2P con-verter) and short to battery detection capability with two STB diagnostic pins. The ADV7281-M/ADV7282-M provides six analog inputs, two STB diagnostic pins, and three general-purpose outputs. The ADV7281-M/ADV7282-M are programmed via a 2-wire, serial bidirectional port (I2C compatible) and are fabricated in a 1.8V CMOS process. The LFCSP package option makes these decoders ideal for space-constrained portable applications.

Analog Devices ADDI7013 CCD Signal Processor

Analog Devices ADDI7013 CCD signal processor is a highly integrated, dual-channel, processor for high speed digital imaging applications. Each channel is specified at pixel rates of up to 75MHz and consists of a complete analog front end (AFE) with analog-to-digital conversion. The Precision Timing core allows adjustment of the correlated double sampler (CDS) and horizontal clocks with 210ps resolution at 75MHz operation. There are eight independent horizontal clock outputs with programmable drive strength to support a variety of CCD timing requirements. Each analog front end includes black level clamping, a CDS, a VGA, and a 75MSPS, 16-bit analog-to-digital converter (ADC). Operation is programmed using a 3-wire serial interface. Analog Devices ADDI7013 CCD signal processor is packaged in a space-saving, 6mm × 6mm, CSP_BGA and is specified over an operating temperature range of -40°C to +85°C.

Analog Devices AD8418 Current Sense AMP

Analog Devices AD8418 current sense amplifier features an initial gain of 20V/V, with a maximum ±0.15% gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8418 offers excellent input common-mode rejection from -2V to +70V. The AD8418 performs bidirectional current measurements across a shunt resistor in a variety of automotive and industrial applications, including motor control, battery management, and solenoid control. The AD8418 offers breakthrough performance throughout the -40°C to +125°C temperature range. It features a zero drift core, which leads to a typical offset drift of 0.1µV/°C throughout the operating temperature range and the common-mode voltage range. Analog Devices AD8418 current sense amplifier is fully qualified for automotive applications and includes EMI filters and patented circuitry to enable output accuracy with pulse-width modulation (PWM) type input common-mode voltages.

Analog Devices ADuM144x Quad-Channel Digital Isolators

Analog Devices ADuM144x Quad-Channel Digital Isolators are micropower devices based on iCoupler® technology. ADI ADuM144x isolators combine high speed, CMOS, and monolithic air core transformer technologies to provide outstanding performance characteristics compared to optocoupler devices. These ADI digital isolators also offer the lowest power of any isolation device on the market. The ENX signals can be used to disable the internal refresh, which lowers the total quiescent current to less than 1µA. These devices free almost 70% of board space but can still withstand high isolation voltages and meet regulatory requirements. ADuM144x isolators operate with supplies as low as 2.25V. This device family also provides low, pulse width distortion <8ns. These devices also have an input glitch filter to protect against extraneous noise disturbances.

Analog Devices ADA466x Precision CMOS Operational Amplifiers

Analog Devices ADA466x Precision CMOS Operational Amplifiers are dual, precision, rail-to-rail input/output amplifier optimized for low power, high bandwidth, and wide operating supply voltage range applications. The ADA466x performance is guaranteed at 3.0V, 10V, and 18V power supply voltages. It is an excellent selection for applications that use single-ended supplies of 3.3V, 5V, 10V, 12V and 15V, and dual supplies of ±2.5V, ±3.3V, and ±5V. It uses the Analog Devices, Inc., patented DigiTrim® trimming technique, which achieves low offset voltage. Additionally, the unique design architecture of the ADA466x allows it to have excellent power supply rejection, common-mode rejection, and offset voltage when operating in the common-mode voltage range of −VSY + 1.5V to +VSY − 1.5V.

Analog Devices AD8229HDZ Instrumentation Amplifier

Analog Devices AD8229HDZ ultra-low noise instrumentation amplifier measures small signals in the presence of large common-mode voltages and high temperatures. AD8229HDZ’s design architecture compensates for the low VBE voltages at high temperatures. The process is dielectrically isolated to avoid leakage currents at high temperatures. It delivers industry leading 1 nV/√Hz input noise performance, and is one of the industry's fastest instrumentation amplifiers. The current feedback architecture is designed for high bandwidth at high gain. The high CMRR of the AD8229HDZ prevents unwanted signals from corrupting the acquisition. Designed for excellent distortion performance in temperatures up to 210°C, AD8229HDZ is ideally suited for demanding applications such as vibration analysis, exhaust gas measurements, down-hole instrumentation, and harsh environment data acquisition.

Analog Devices ADSP-CM40x ARM Processors & Development Kits

Evaluation hardware for the ADSP-CM40x provides a low-cost hardware solution for development. The ADSP-CM403F EZ-KIT Lite and the ADSP-CM408F EZ-KIT Lite include all hardware necessary to immediately begin evaluation. Other development boards can be purchased without a debug probe.

Analog Devices ADSP-CM40x Mixed Signal Control Processors utilize the ARM® Cortex®-M4 processor core, integrated with high precision ADCs, digital accelerators, filters, SRAM, flash memories, and a rich set of peripherals. The ADSP-CM40x processors are suitable for a wide myriad of embedded applications requiring high performance real-time control and analog conversion, such as motor control and industrial applications.

Analog Devices AD5687/AD5687R Dual 12-Bit nanoDAC+™

Analog Devices AD5687/AD5687R Dual 12-Bit nanoDAC+™ are low power, dual, 12-bit, buffered voltage output digital-to-analog converters (DACs). The devices include a gain select pin giving a full-scale output of 2.5V (gain = 1) or 5V (gain = 2). The AD5687/AD5687R operate from a single 2.7V to 5.5V supply, are guaranteed monotonic by design, and exhibit less than 0.1% FSR gain error and 1.5mV offset error performance. Devices are available in a 3mm × 3mm LFCSP and a TSSOP package. The AD5687/AD8687R also incorporate a power-on reset circuit and a RSTSEL pin that ensure that the DAC outputs power up to zero scale or midscale and remain there until a valid write takes place. Each part contains a per channel power-down feature that reduces the current consumption of the device to 4μA at 3V while in power-down mode. The AD5687/AD5687R use a versatile serial peripheral interface that operates at clock rates up to 50MHz. Each device contains a VLOGIC pin that is intended for 1.8V/3V/5V logic.

Analog Devices ADM3485E Low Power Data Transceiver

Analog Devices ADM3485E Low Power Data Transceiver provides ±15kV ESD protection and is suitable for half-duplex communication on multipoint bus transmission lines. The ADM3485E is designed for balanced data transmission and complies with TIA/EIA standards RS-485 and RS-422. The ADM3485E is a half-duplex transceiver that shares differential lines and has separate enable inputs for the driver and the receiver. The devices have a 12kΩ receiver input impedance, which allows up to 32 transceivers on a bus. Because only one driver should be enabled at any time, the output of a disabled or powered-down driver is tristated to avoid overloading the bus. The receiver has a fail-safe feature that ensures a logic high output when the inputs are floating. Excessive power dissipation caused by bus contention or by output shorting is prevented with a thermal shutdown circuit.

Analog Devices ADL5511 RF RMS Detector

Analog Devices ADL5511 RF RMS Detector is an RF envelope and TruPwr™ rms detector. The envelope output voltage is presented as a voltage that is proportional to the envelope of the input signal. The rms output voltage is independent of the peak-to-average ratio of the input signal. The rms output is a linear-in-V/V voltage with a conversion gain of 1.9V/Vrms at 900MHz. The envelope output has a conversion gain of 1.46V/V at 900MHz and is referenced to an internal 1.1V reference voltage, which is available on the EREF pin. The ADL5511 can operate from dc to 6GHz on signals with envelope bandwidths up to 130MHz. The extracted envelope can be used for RF power amplifier (PA) linearization and efficiency enhancements and the rms output can be used for rms power measurement. The high rms accuracy and fast envelope response are particularly useful for envelope detection and power measurement of broadband, high peak-to-average signals that are used in CDMA2000, W-CDMA, and LTE systems.

Analog Devices AD5689, AD5689R Dual 16-Bit nanoDAC+™

Analog Devices AD5689, AD5689R Dual 16-Bit nanoDAC+™ is a member of the nanoDAC+™ family low power, dual, 16-bit, buffered voltage output digital-to-analog converter (DAC). It includes a gain select pin giving a full-scale output of 2.5V (gain = 1) or 5V (gain = 2). The AD5689 operates from a single 2.7V to 5.5V supply, are guaranteed monotonic by design, and exhibit less than 0.1% FSR gain error and 1.5mV offset error performance. It also incorporate a power-on reset circuit and a RSTSEL pin that ensures that the DAC outputs power up to zero scale or midscale and remain there until a valid write takes place. Each contains a per channel power-down feature that reduces the current consumption of the device to 4μA at 3V while in power-down mode.

Analog Devices ADP5033 Dual Buck Regulators

Analog Devices ADP5033 Dual Buck Regulators combine two high performance buck regulators and two low dropout regulators (LDO) in a tiny, 16-ball, 2mm × 2mm WLCSP to meet demanding performance and board space requirements. The high switching frequency of the buck regulators enables tiny multilayer external components and minimizes the board space. The two bucks operate out of phase to reduce the input capacitor requirement and noise. The low quiescent current, low dropout voltage, and wide input voltage range of the ADP5033 LDO extend the battery life of portable devices. The ADP5033 LDOs maintain power supply rejection greater than 60dB for frequencies as high as 10kHz while operating with a low headroom voltage.

Analog Devices EVAL-AD7980SDZ Evaluation Kit

Analog Devices EVAL-AD7980SDZ full-featured evaluation kit for AD7980 analog-to-digital converters is designed to demonstrate the ADC's performance and provide an easy to understand interface for a variety of system applications. This ADI evaluation kit operates in stand alone mode or in conjunction with EVAL-SDP-CB1Z System Development Platform. When operated with the System Development Platform, software is provided enabling the user to perform a detailed analysis of the ADC's performance.

Analog Devices ADP5037 800mA Buck Regulators

Analog Devices ADP5037 800mA Buck Regulators combine two high-performance buck regulators and two low dropout (LDO) regulators in a small, 24-lead 4mm × 4mm LFCSP to meet demanding performance and board space requirements. The high switching frequency of this ADI device's buck regulators enables tiny multilayer external components and minimizes the board space. The two buck regulators operate out of phase to reduce the input capacitor requirement. The low quiescent current, low dropout voltage, and wide input voltage range of the ADP5037 LDOs extend the battery life of portable devices. The ADP5037 LDOs maintain power supply rejection greater than 60 dB for frequencies as high as 10 kHz while operating with a low headroom voltage.

Analog Devices ADuM4160 USB Digital Isolator

Analog Devices ADuM4160 USB Digital Isolator is a USB port isolator based on iCoupler® technology. ADI ADuM4160 combines high speed CMOS and monolithic air core transformer technology to provide outstanding performance characteristics. The device is easily integrated with low and full speed USB-compatible peripheral devices. ADuM4160 provides mechanisms for detecting the direction of data flow and control over the state of the output buffers. Data direction is determined on a packet-by-packet basis. ADI ADuM4160 uses the edge detection based iCoupler technology in conjunction with internal logic to implement a transparent, easily configured, upstream facing port isolator. Isolating an upstream facing port provides several advantages in simplicity, power management, and robust operation. The isolator has propagation delay comparable to that of a standard hub and cable. It operates with the supply voltage on either side ranging from 3.1 V to 5.5 V, allowing connection directly to VBUS by internally regulating the voltage to the signaling level. ADuM4160 provides isolated control of the pull-up resistor to allow the peripheral to control connection timing.

Analog Devices ADA4077 High Precision Amplifier


Analog Devices Applications

Analog Devices broad product portfolio supports a wide range of markets. Select Applications below to learn more.

Analog Devices Videos

Analog Devices | Active Filter Development Tools (9)
Analog Devices | Amplifier IC Development Tools (259)
Analog Devices | Audio IC Development Tools (50)
Analog Devices | Clock & Timer Development Tools (107)
Analog Devices | Data Conversion IC Development Tools (564)
Analog Devices | Daughter Cards & OEM Boards (105)
Analog Devices | Development Boards & Kits - 8051 (15)
Analog Devices | Development Boards & Kits - ARM (27)
Analog Devices | Development Boards & Kits - Other Processors (32)
Analog Devices | Development Software (34)
Analog Devices | Digital Potentiometer Development Tools (39)
Analog Devices | Emulators / Simulators (6)
Analog Devices | Interface Development Tools (69)
Analog Devices | Networking Development Tools (1)
Analog Devices | Other Development Tools (18)
Analog Devices | Other Modules (7)
Analog Devices | Power Management IC Development Tools (267)
Analog Devices | RF Development Tools (63)
Analog Devices | Sockets & Adapters (10)
Analog Devices | Switch IC Development Tools (21)
Analog Devices | Video IC Development Tools (43)
Analog Devices | LED Lighting Development Tools (15)
Analog Devices | Programmable Oscillators (4)
Analog Devices | Wall Mount AC Adapters (4)
Analog Devices | 8-bit Microcontrollers - MCU (84)
Analog Devices | ADC / DAC Multichannel (3)
Analog Devices | Analog & Digital Crosspoint ICs (59)
Analog Devices | Analog Comparators (149)
Analog Devices | Analog Switch ICs (665)
Analog Devices | Analog to Digital Converters - ADC (2572)
Analog Devices | ARM Microcontrollers - MCU (91)
Analog Devices | Audio A/D Converter ICs (12)
Analog Devices | Audio Amplifiers (86)
Analog Devices | Audio D/A Converter ICs (26)
Analog Devices | Audio DSPs (36)
Analog Devices | Audio Sample Rate Converters (8)
Analog Devices | Audio Transmitters, Receivers, Transceivers (1)
Analog Devices | Battery Management (18)
Analog Devices | Buffers & Line Drivers (6)
Analog Devices | CAN Interface IC (8)
Analog Devices | Clock Buffer (25)
Analog Devices | Clock Drivers & Distribution (30)
Analog Devices | Clock Generators & Support Products (106)
Analog Devices | Current & Power Monitors & Regulators (4)
Analog Devices | Current Sense Amplifiers (121)
Analog Devices | Data Converter ICs - Various (144)
Analog Devices | Data Converter Systems (46)
Analog Devices | Differential Amplifiers (385)
Analog Devices | Digital Isolators (705)
Analog Devices | Digital Potentiometer ICs (558)
Analog Devices | Digital Signal Processors & Controllers - DSP, DSC (395)
Analog Devices | Digital to Analog Converters - DAC (2358)
Analog Devices | Display Drivers & Controllers (2)
Analog Devices | Display Interface IC (55)
Analog Devices | Encoders, Decoders, Multiplexers & Demultiplexers (20)
Analog Devices | Equalizers (27)
Analog Devices | Gate Drivers (36)
Analog Devices | High Speed Operational Amplifiers (347)
Analog Devices | Hot Swap Voltage Controllers (43)
Analog Devices | Instrumentation Amplifiers (353)
Analog Devices | Interface - CODECs (70)
Analog Devices | Interface - I/O Expanders (19)
Analog Devices | Interface - Specialized (20)
Analog Devices | Isolation Amplifiers (43)
Analog Devices | Laser Drivers (31)
Analog Devices | LCD Drivers (2)
Analog Devices | LCD Gamma Buffers (8)
Analog Devices | LDO Voltage Regulators (98)
Analog Devices | LED Lighting Drivers (30)
Analog Devices | Limiting Amplifiers (2)
Analog Devices | Linear Voltage Regulators (414)
Analog Devices | Logarithmic Amplifiers (89)
Analog Devices | LVDS Interface IC (45)
Analog Devices | Metering Systems on a Chip - SoC (16)
Analog Devices | Microphone Preamplifiers (14)
Analog Devices | Modulator / Demodulator (64)
Analog Devices | Motor / Motion / Ignition Controllers & Drivers (1)
Analog Devices | Multimedia Misc (11)
Analog Devices | Multiplexer Switch ICs (369)
Analog Devices | Multipliers / Dividers (84)
Analog Devices | Operational Amplifiers - Op Amps (330)
Analog Devices | Phase Locked Loops - PLL (202)
Analog Devices | PMIC Solutions (8)
Analog Devices | Power Factor Correction - PFC (2)
Analog Devices | Power Management Specialized (51)
Analog Devices | Power Switch ICs - Power Distribution (18)
Analog Devices | Precision Amplifiers (1172)
Analog Devices | RF Amplifier (49)
Analog Devices | RF Detector (21)
Analog Devices | RF Front End (11)
Analog Devices | RF Mixer (36)
Analog Devices | RF Receiver (7)
Analog Devices | RF Switch ICs (28)
Analog Devices | RF Transceiver (32)
Analog Devices | RF Transmitter (7)
Analog Devices | RFID Transponders (2)
Analog Devices | RS-232 Interface IC (299)
Analog Devices | RS-422 Interface IC (2)
Analog Devices | RS-422/RS-485 Interface IC (163)
Analog Devices | Sample & Hold Amplifiers (40)
Analog Devices | Special Purpose Amplifiers (90)
Analog Devices | Supervisory Circuits (646)
Analog Devices | Switching Controllers (63)
Analog Devices | Telecom Line Management ICs (2)
Analog Devices | Timers & Support Products (40)
Analog Devices | Touch Screen Converters & Controllers (16)
Analog Devices | Transimpedance Amplifiers (6)
Analog Devices | Transistors Bipolar - BJT (18)
Analog Devices | Translation - Voltage Levels (36)
Analog Devices | Up-Down Converters (11)
Analog Devices | Video A/D Converter ICs (77)
Analog Devices | Video Amplifiers (120)
Analog Devices | Video ICs (189)
Analog Devices | Video Switch ICs (10)
Analog Devices | Voltage References (556)
Analog Devices | Voltage Regulators - Switching Regulators (258)
Analog Devices | Voltage to Frequency & Frequency to Voltage (59)
Analog Devices | Acceleration Sensor Development Tools (55)
Analog Devices | Accelerometers (92)
Analog Devices | Board Mount Hall Effect / Magnetic Sensors (2)
Analog Devices | Board Mount Temperature Sensors (242)
Analog Devices | Gyroscopes (41)
Analog Devices | IMUs - Inertial Measurement Units (11)
Analog Devices | Magnetic Sensor Development Tools (1)
Analog Devices | MEMS Microphones (6)
Analog Devices | Multiple Function Sensor Development Tools (8)
Analog Devices | Position Sensor Development Tools (7)
Analog Devices | Pressure Sensor Development Tools (2)
Analog Devices | Temperature Sensor Development Tools (19)
Analog Devices | Test Probes (5)
Analog Devices | DC Power Cords (1)
Analog Devices | Specialized Cables (1)