Home | Advanced Sensors | Aerospace | Alden | Audio | Backplane Systems | Commercial Products | Connex
Fiber Optics | Industrial | PCD | RF | SINE | Spectra-Strip | SV Microwave | TCS | Tuchel
Amphenol Aerospace is the world leader in the design, manufacture, and supply of high-performance interconnect systems for Military, Commercial Air, and Industrial markets. Amphenol Aerospace designs and manufactures circular, rectangular, electronic, fiber optic, EMI/EMP filter, and a range of special applications connectors and interconnect systems. Amphenol Aerospace has been awarded both AS9100 - Revision C and ISO9001:2008 quality assurance certifications.
Amphenol Aerospace 2M Micro-Miniature Connectors are designed for interconnect applications requiring high performance. These 2M Micro-Miniature Connectors are 71% lighter, 52% smaller, and have 60% more contact density than other connectors in their class. These micro-miniature connectors are designed and tested to Mil-Spec standards and comparable to MIL-DTL-38999 connectors. 2M Series connectors are intermateable and intermountable with existing micro-miniature aerospace/defense connectors. These lightweight, high density connectors maximize SWaP (size, weight and power) in a variety of high-reliability, harsh environments. 2M is intermateable with Glenair's Mighty Mouse.
Amphenol Aerospace High-Speed Solutions are connector and cable solutions for both High Speed Copper and Fiber Optic applications. Amphenol Aerospace high speed fiber optic interconnect solutions are designed for use in the harsh environments found in military and aerospace applications. Amphenol Aerospace High Speed/High Frequency Copper Interconnects provide high speed transmission and operate in high frequency conditions. Amphenol Aerospace also provides a large array of high speed cable assemblies with high speed quadrax and differential twinax contacts, as well as coax and concentric twinax contacts.
Amphenol Aerospace High Speed Quadrax contacts consist of an outer
contact with four inner contacts spaced to form two 100 or 150 Ohm
controlled impedance differential pair. Both contacts, when used in
Amphenol MIL-DTL-38999 Series III and ARINC type connectors, provide an
excellent alternative for harsh environment applications such as:
Ethernet 100 Base-T-100 Ohm, Gigabit Ethernet 1000 Base-T-100 Ohm, Fibre
Channel-150 Ohm, IEEE1394B FireWire-110 Ohm. Quadrax contacts are gold
plated, crimp termination Finish of mating contact parts: supplied with
0.000050 min. gold over nickel on mating parts. Consult Amphenol for
availability of other finishes.
Amphenol Aerospace MT Fiber Ferrules offer a high fiber density
in a relatively small cylindrical connector package with all the
advantages of the MIL-DTL-38999 Series III connector. Three levels of
alignment provide for a precise fiber to fiber interface. Two
arrangements are available, shell size 11 with one ferrule, and shell
size 21 with four ferrules.
Amphenol Aerospace PDS-236 Saber Fiber to Copper Converter offers a
flexible, affordable, and rugged fiber copper converter system with many
options available. Amphenol Aerospace has taken two technologies and
combined them into a hybrid connector. Now you can transfer high speed
data seamlessly from copper to fiber and from fiber to copper through
the Saber. The Saber has no need for internal subsystem fiber harnesses,
interconnect, or transceivers. The Saber utilizes copper transceivers
and existing interconnect (backplane, harnessing, faceplate) for system
fiber connection. Media conversion at the connector reduces system
complexity and cost. The MS29504 system fiber interface supporting
speeds of 1G, 2G, 4G, 10Gbps and the copper interface supports 2X high
speed channels on 6.5 Gbps capable split pair quadrax PC tails or flex
assembly. Full ruggedization for environmentals and EMI/EMP is standard
on the Saber Fiber to Copper Converter.
Amphenol Aerospace Heavy Duty Class L Commercial MIL-DTL-22992 Connectors
are offered as a lower-cost, commercial version of the heavy duty power
connectors critical for rugged environmental conditions. These
connectors feature MIL-DTL-22992 Class L insert arrangements and an arc
quenching design to protect users and equipment if connectors are
inadvertently disconnected under load. A programmed coupling sequence
ensure grounding and neutral contacts engage before power contacts.
Constructed using a high strength aluminum and an unique combination of
grommets and seals, these rugged connectors provide waterproofing in any
condition - mated or unmated, capped or uncapped.
Amphenol Aerospace HD38999 Connectors offer 30% more contact density
than the highest density Mil Spec 38999 connectors of its size. Designed
using mil-specified 38999 components, mil-qualified 39029 size 23
contacts, and mil-qualified 38999 insert materials, these connectors are
essentially a drop-in replacement for the standard 38999 connector. The
design allows the user to increase the number of contacts without
increasing the size of their connector. To meet reduced system size
requirements, users can select smaller shell sizes without decreasing
the number of contacts. Amphenol Aerospace qualified their connectors to
the requirements of MIL-DTL-38999 making the HD38999 Connectors
well-suited for applications such as avionics, C4I, commercial airframe, military vehicles, space, radar for ground and air, and missile and ordinance.
Compliant with the MIL-DTL-26482 standard for harsh environments, Amphenol's MIL-DTL-26482 Series II Matrix® Circular Connectors feature an environmentally-resistant design, rear insertable/releaseable contacts to protect the front of the connector, and contacts rated to SAE AS39029. Additional features include 3-point bayonet lock system, 5 key/keyway design, and visual confirmation of complete coupling. The Amphenol MIL-DTL-26482 Series II Matrix® Circular Connectors have a recommended operating voltage of 1,000 VAC (RMS), -65⁰C to 200⁰C operating temperature range, and 500 mating cycles minimum. This series is available in shell sizes 8 to 24, 34 insert arrangements, alternate positioning, and various finishes. These circular connectors are ideally suited for military & commercial air, military aircraft carriers, C4ISR, and instrumentation/process control/test equipment.
The Amphenol MIL-DTL-5015 Matrix® Circular Connectors bridge the gap between connector standards of legacy applications and the environmental and high performance requirements of current technologies. The series features multiple interlock systems to ensure permanent insert retention. Amphenol's MIL-DTL-5015 Matrix® Circular Connectors are fully sealed against environmental extremes and intermateable with existing MIL-DTL-5015 solder or crimp versions.
Amphenol's MIL-DTL-83723 Series III Matrix®/Pyle® Circular Connectors provide many choices within the range of medium-sized, environmentally-resistant circular connectors. The versatility of this family makes it increasingly popular for panel mount, box mount and line-to-line applications in aircraft. For general duty, environmentally-resistant requirements, the series provides a wide range of interconnect solutions. The Amphenol MIL-DTL-83723 Series III Matrix®/Pyle® Circular Connectors feature a captive coupling nut, contacts that conform to SAE AS39029, and a rated operating voltage to 600 VAC (RMS) at sea level.
The Amphenol MIL-DTL-38999 Series I Circular Connectors are subminiature circular connectors designed to offer high reliability and high contact density while providing maximum weight and space savings. Developed to meet the needs of the Aerospace industry, the Amphenol MIL-DTL-38999 Series I Circular Connectors feature a lightweight, space saving design, 3-point bayonet lock system, 100% scoop-proof design, 5 key/keyway design, error-proof alternate positioning. EMI shielding, and fixed solder contacts. This series uses standard MIL-DTL-38999 contacts, insert arrangements and application tools. Ideally suited for industrial applications, military & commercial air, military vehicles, missiles & ordnance, and C4ISR.
The Amphenol MIL-DTL-38999 Series II consists of subminiature circular connectors designed to offer high reliability and high contact density with maximum weight and space savings. Amphenol's MIL-DTL-38999 Series II Circular Connectors feature a lightweight, space-saving design, 3-point bayonet lock system, error-proof alternate positioning. EMI shielding, and fixed solder contacts. Ideally suited for industrial applications, military & commercial air, military vehicles, missiles & ordnance, and C4ISR.
Amphenol MIL-DTL-38999 Series III Circular Connectors offer
the highest performance capabilities for the most demanding of
applications in both general duty and harsh environment applications.
Developed to operate under severe high temperature and vibration, the Amphenol MIL-DTL-38999 Series III Circular Connectors feature rapid coupling via the Tri-Start™ thread, shell-to-shell or metal-to-metal bottoming, and improved EMI shielding. Amphenol
designed these features to provide an EMI shielding capability of 65 dB
minimum at 10 GHz and corrosion resistance up to 500 hour salt spray
exposure. The Amphenol MIL-DTL-38999 Series III Circular Connectors
have a rated current range 1.5AMPS-5.0AMPS, temperature range of -65⁰C
to 175⁰C, insulation resistance of 5000 megohms min.@ 500 VDC 25C, and a
dielectric withstanding voltage of 1000 VRMS @ sea level. These rugged
and highly reliable circular connectors are ideally suited for
industrial, military & commercial air, military vehicles, missiles
& ordnance, C4ISR, and space applications.