RECOM Home | RECOM Power | RECOM Lighting
RECOM Lighting designs and manufactures lighting solutions, offers LED drivers and supplies component parts to help their customers illuminate almost anything one could think of, from solar powered path lighting in city parks to trains and buses, shopping centers and airports. RECOM Lighting supplies the engines that drive the LED lighting vehicle – dimmable drivers that make lighting systems more efficient, make the LED lights last longer, or protect the environment.
RECOM Lighting RELI-D01/R is a DALI to analog control signal interface
which is compliant with the DALI IEC62386 standard. The output is
selectable between PWM and 0-10V or 1-10V and is compatible with all
RECOM dimmable LED drivers as well as other manufacturers' products. The
output can control six or more LED drivers, allowing the lighting in a
whole room or office to be dimmed with just one DALI address. A built-in
relay can be used to switch off the LED drivers under software control
to give zero no-load consumption. The interface is AC powered (110VAC or
230VAC) and consumes typically only 1.6W in operation.
RECOM Lighting RACD100 100W LED Driver series is designed for high voltage LED loads of up to 142V. The -A model can be dimmed with PWM or 1-10V inputs. Due to wide input voltage range these LED drivers are suitable for worldwide use. They are IP67 rated and can be used for both indoor and outdoor applications. The warranty is 5 years.
RECOM Lighting RACD60A 60W LED Driver series comes with a 3-in-1 dimming function so that the LED load can be dimmed with analog (1-10V), PWM or resistor inputs. Due to wide input voltage range these dual mode CC/CV LED drivers are suitable for worldwide use. They operate with efficiencies of up to 87%, feature active PFC and are fully protected against short circuit, overvoltage, and over-temperature conditions. They are sealed against damp and wet conditions and the warranty is 5 years.
RECOM Lighting RACD45A 45W LED Driver series comes with a 3-in-1 dimming function so that the LED load can be dimmed with analog (1-10V), PWM or resistor inputs. Due to wide input voltage range these dual mode CC/CV LED drivers are suitable for worldwide use. They operate with efficiencies of up to 87%, feature active PFC and are fully protected against short circuit, overvoltage, and over-temperature conditions. They are sealed against damp and wet conditions and the warranty is 5 years.
RECOM Lighting Lightline 150W AC-DC Converter is a single output CE and UL Certified Class 1 LED driver. RACD150-ENEC series is ENEC certified.
Constant current and constant voltage modes and available with efficiency as high as 90% at 230Vac. The device is designed for indoor and outdoor use with IP67 protection.
RECOM Lighting RACD25 Series are LED drivers with an output of 25W and a high efficiency up to 85%. The wide input voltage range from 90VAC to 295VAC makes it ideal for worldwide use. The modules are ideal power sources necessary for the conversion of fluorescent tubes to modern LED technology because of their long, narrow shape (174.5x30.5x25mm). Applications include signage, contour, architectural, emergency and security lighting. RACD25 LED drivers are EN and UL certified.
RECOM Lighting RACD20/277 series are 20W LED drivers which offer active PFC and a wide input voltage range from 90VAC to 305VAC which makes the series suitable for use in 115V, 230V- as well as 277V networks. Due to their compact, round design, they will fit in space-restricted applications. They meet protection class IP66 and are thus suitable for outdoor use or for use in damp areas such as swimming halls or garages.
RECOM Power RACD07 LED Driver is a constant current 7W AC/DC source for LED lighting with a wide input voltage range. The LED drivers are available with constant current outputs of 350mA, 500mA, or 700mA. The series is IP67 rated and suitable for use in dry, damp, or wet areas. RACD07 drivers have a 5 year warranty.
RECOM Lighting RACD100/RACD150 Series LED Drivers are 100W and 150W are fully sealed IP67 LED drivers with a universal input range of 90-305VAC. RACD100 series offers constant current output from 2.1A to 8.3A at
voltages from 12V to 48V. RACD150 has constant current output from 3.2A
to 6.3A at voltages from 24V to 48V. Both series operate at either constant current or constant voltage mode, allowing for driving LEDs directly or via local constant current DC/DC modules on the light engine board. The drivers feature active PFC, operating temperatures of -30ºC to +70ºC, and offer protection against short circuit, open circuit, overload, and over temperature conditions. Indoor and outdoor applications include lighting for roads, streets, walkways, car parks, public buildings, and tunnels.
RECOM Lighting RACV30 LIGHTLINE 30W LED AC/DC-converters offer 30W power factor correction and a single constant voltage output. They use an input voltage of 90-264 VAC and provide an output voltage of either 12 or 24 VDC. RACV30 LIGHTLINE AC/DC-converters are short circuit, overload, and overtemperature protected. They are also UL/CE certified and measure at 160 x 50 x 22mm, ideal for applications where space is a premium.
The RCD-48 Series Constant Current Buck LED Driver from RECOM Lighting is a step-down constant current source designed for driving high power LED applications. With input voltage up to 60VDC and constant current outputs of 350, 500, 700 and 1200mA the RCD-48 Series provides power up to 70W. This buck driver is ideal for operation with longer LED-chains and larger multi-chip arrays - perfect for applications like 48V bus lighting solutions or high voltage LED arrays (e.g. high bay lights).
RECOM Lighting RCD-48 LED Drivers are dimmable down to zero with external digital (PWM) or analog dimming control. The PWM control input can be directly connected to a microcontroller. Efficiency is rated at 96%, with an operating temperature range -40°C and +85°C. The modules are available with pins for PCB mounting or with flying leads for non-PCB applications. All types are certified to EN/UL-60950-1.
RECOM Lighting's RACT20 Series LED Driver is a constant current dimmable AC/DC source for driving high power LED applications. The TRIAC dimming function works with leading or trailing edge dimmers and comes with linear dimming down to 0%. This driver is suitable for indoor LED lighting systems and can power 5 to 15 high power LEDs or single LED arrays.
These new AC/DC drivers are available with either 230VAC or 115VAC input. They offer 20 watts, with constant currents of 350, 500, 700 or 1050mA. With a power factor correction (PFC) of >95%, these LED drivers exceed EN 61000-3-2 requirements. RACT20 Series LED Drivers from RECOM Lighting are UL 60950-1 certified and
EN-60950-1 certified (European versions) with a "Design Lifetime"
>70.000 hours and a 5 year warranty.
The RACD Series of low power AC input LED Drivers from RECOM Lighting offers a low cost solution for low power solid state lighting. The RACD Series of LED Drivers offers distributed power, from 3W to 60W, to provide the exact amount of power needed for each application. They are a perfect match for many LED arrays such as Cree's MPL, MTC, and CXA, as well as arrays from Lumileds (LuxeonS), Bridgelux (RS, EX), Sharp (Mega Zenigata) and other top LED manufacturers. The series is also ideal for use with the award winning Helieon™ lighting module, which uses Bridgelux LED arrays, and GE's Infusion module. RECOM Lighting's RACD Series is isolated and is certified for safety to UL-8750 and EN-61347.
RECOM Lighting's AC/DC Converter LED Drivers, part of the Lightline product family of Single Output Power Modules, offer constant current switching power suitable for driving high power LED's(Vf=3.6V). RECOM Lighting's RACD12 Series is a 12W AC/DC LED power supply that can drive up to 10 high power LED's. RACD12 LED drivers have current output fixed at 350mA, 500mA, or 700mA. The 20 Watt RACD20 Series drivers have output current fixed at 350mA, 500mA, 700mA or 1050mA. Both series have active power factor correction as a standard feature and both driver modules feature both screw terminal and socket output connections. The socket connector eliminates the possibility of miswiring and damaging the LED load if the LED's are preassembled into a wiring harness or lamp fitting.
RECOM Lighting's RACD60 Series 60W AC/DC LED Drivers are part of their Lightline family of PFC Single Output LED Drivers. These compact drivers have universal input voltage and constant current switching power suitable for driving high power LED's. RECOM Lighting's RACD60 Series works in two different modes: CV mode and CC mode. In CV mode, the power module acts as a voltage source at loads below a preset current limit, and in CC mode, acts as a current source at loads above the preset current limit; therefore, the same power supply can be used with both CV and CC LED modules. The current limit can be set by the user. Other features of RACD60 LED Drivers are full protection against short circuit, overload and over-temperature; standard built-in power factor correction; low-cost open frame design; high efficiency; adjustable current limit; and 5-year warranty.
RECOM Lighting's family of Constant Current LED Drivers, which includes the RCD-24 Series Regulated DC/DC Converters, is a step-down constant current source designed for driving high power white LEDs. With several standard output currents available (300mA, 350mA, 500mA, 600mA, 700mA, 1000mA, and 1200mA), these compact drivers can be used with a wide range of LED applications. Features of RECOM Lighting's RCD-24 Series DC/DC Converters include very high efficiency, wide input voltage range, high ambient temperature range, and two means of dimming-PWM/digital control and analog voltage dimming, both of which are independent and can be combined. These drivers are designed to be as reliable as the LEDs they are driving, even at the full operating temperature.