Cypress delivers high-performance, mixed-signal, programmable solutions that provide customers with rapid time-to-market and exceptional system value. Cypress offerings include the flagship PSoC® programmable system-on-chip families and derivatives such as PowerPSoC® solutions for high-voltage and LED lighting applications, CapSense® touch sensing and TrueTouch solutions for touchscreens. Cypress is the world leader in USB controllers, including the high-performance West Bridge® solution that enhances connectivity and performance in multimedia handsets. Cypress is also a leader in high-performance memories and programmable timing devices.
Cypress CapSense® Controllers are the market leading Capacitive Sensing solution that has replaced more than 3.5 Billion sensors with a Capacitive touch interface. The CapSense Family is based on Cypress’s Programmable System on Chip (PSoC) platform that provides customers with the flexibility needed to make last minute changes, offers robust noise immunity, enables quick time to market and system scalability. Cypress’s latest addition to this portfolio is the ultra-low power CY8C20xx6A family for the most demanding Capacitive Sensing applications. This low-power family is enabled by Cypress SmartSense™ – the industry’s most advanced Capacitive Sensing algorithm that makes Cypress CapSense the easiest to use in the market.
Cypress PSoC 4 Pioneer Kit is an easy-to-use and inexpensive development platform enabling you to create unique designs with the flexibility of PSoC 4. Featuring a member of the PSoC 4200 family, this kit gives you the power of an ARM Cortex-M0 combined with the fully customizable analog and digital fabric of the PSoC. The PSoC 4 Pioneer Kit includes connectors for Arduino Shields and Digilent Pmod daughter cards, enabling you to pick from a variety of third party expansion boards. The board also features a CapSense Slider, an RGB LED, a push button switch. The PSoC 4 architecture supports an extremely low-leakage hibernate mode consuming only 150 nA. It features a best-in-class 20 nA stop mode, eliminating the need for external power circuitry for sleep and wake-up control. While in active mode, it provides fully functional analog capabilities from 1.71 – 5.5 V. An onboard PSoC 5LP device serves as the programmer and debugger, eliminating the need for external programmers. Interface through the USB connector to talk to your PC over SWD, USB-UART or USB-I²C. With PSoC Creator you can design your system, write firmware, and step-through code using the built-in debugger.
Cypress CY7C652xx USB-Serial Bridge Controllers are the first in the industry to offer configurable serial channels for UART/I2C/SPI interfaces, with industry’s lowest power consumption in stand-by mode (5µA). These controllers integrate the industry-leading CapSense capacitive-touch sensing technology (for touch sensitive key switches) and USB-IF Battery Charging specification ver. 1.2 (to detect the source of power on the USB port). These controllers are ideal for applications such as portable medical devices (like blood-glucose meters), point-of-sales terminals, Serial Cables (including USB-to-UART and RS232 cables) and many other applications requiring USB connectivity.
Cypress Capsense Express Capacitive Touch Sensing Controller solutions make button replacement easy by eliminating unnecessary software tools, firmware development, device programming, and system tuning. Cypress CapSense Express delivers a register configurable device which does not require firmware or device coding, and is enabled with the Cypress SmartSense Auto-Tuning algorithm, eliminating the need to manually tune the user interface. The controller supports 10 capacitive sensing buttons and 10 GPOs. Unregulated battery operation is available due to a voltage range of 1.71 to 5.5V and ultra low power consumption in both run and sleep modes. Additional features include noise immunity to radiated and conducted noise, and flanking sensor suppression to maintain robust sensing while using closely spaced buttons.
Cypress Semiconductor's PRoC-UI (Programmable Radio-on-Chip – User Interface) is Cypress' new integrated touch + wireless, System-on-Chip (SoC). It combines the low-power 2.4-GHz proprietary WirelessUSB™-NL Radio-on-a-Chip with Cypress' CapSense® and TrueTouch® capacitive touch technologies. PRoC-UI enables user interface functionality in wireless devices, including gestures that are compatible with the Windows 8™ applications. The one-chip solution also offers standard HID microcontroller functionality, effectively combining three chips into one to save BOM cost, board space, and power, while increasing reliability compared with multi-chip implementations.
Cypress PSoC4 ARM Cortex-M0 Based Programmable SoC architecture combines Cypress’s best-in-class PSoC analog and digital fabric and industry-leading CapSense capacitive touch technology with ARM’s power-efficient Cortex-M0 core. The truly scalable, cost-efficient architecture delivers PSoC’s trademark flexibility, analog performance and integration, along with access to dozens of free PSoC Components—“virtual chips” represented by icons in Cypress’s PSoC Creator integrated design environment. The new PSoC4 device class will challenge proprietary 8-bit and 16-bit microcontrollers (MCUs), along with other 32-bit devices.
Cypress TX2UL USB Transceivers are the world’s smallest USB 2.0 ULPI transceiver. TX2UL is suitable for use in any application that already has a USB controller but requires a ULPI transceiver. TX2UL supports a high variable input voltage range of 3.0 V- 5.775 B, and is configurable to input frequencies of 13, 19.2, 24, 26 MHz. Along with its ultra small size (2.14 mm x 1.76 mm), TX2UL consumes only 5 uA in sleep mode, thus making it ideal for mobile and battery powered applications. TX2UL is well suited for applications such as USB modem dongle, handsets and other consumer electronic devices.
Cypress’s USB Host Controllers bring the versatility of USB to your design. With single and dual role host/peripheral controllers, your design’s USB ports can now have both device and host capabilities. Cypress’s high-performance USB host controllers are used in embedded applications such as PDAs, set-top boxes, personal media players, and automotive infotainment.
Cypress’s Hi-Speed USB Peripherals family encompasses both programmable and fixed function solutions, tailored to serve storage and other user-specific applications. Typical applications include PC peripherals, handsets, LCD TV and set top boxes. Cypress’s Hi-Speed USB solutions are supported by industry’s best software tool kits and reference designs, which would accelerate the development time for any design.
Cypress West Bridge® Controller family offers a revolutionary architectural enhancement for embedded applications. Peripheral controllers in the West Bridge family function as a companion chip to an embedded central processing unit (CPU) to free it from data-intensive operations. West Bridge controllers achieve superior data transfer performance by enabling simultaneous and independent data paths between USB port, mass storage devices and embedded processors.
Cypress PSoC® 5LP Cortex™-M3 programmable system on chip devices offer unmatched high-precision analog and the flexibility to design custom system solutions. Designers can use PSoC 5LP with PSoC Creator components to shorten design schedules accelerating time-to-market. PSoC 5LP is a true system-level solution providing microcontroller unit (MCU), memory, analog, and digital peripheral functions in a single chip. The CY8C58LP family offers a modern method of signal acquisition, signal processing, and control with high accuracy, high bandwidth, and high flexibility. Analog capability spans the range from thermocouples (near DC voltages) to ultrasonic signals. The CY8C58LP family can handle dozens of data acquisition channels and analog inputs on every general-purpose input/output (GPIO) pin.
CY8CKIT-050 PSoC 5LP Development Kit enables you to evaluate, develop and prototype high precision analog, low-power and low-voltage applications powered by Cypress's CY8C58LP high precision analog device family.
Cypress CY7C63xxx enCoRe™ II Low Speed USB Peripheral is programmable low speed USB controller that eliminates the external crystal or resonator, pull up resistors, wakeup circuitry and 3.3V regulator to reduce the overall system cost. enCoRe II features a wide selection of I/O (up to 20 GPIOs) and memory (up to 8 kB of flash for user code and 256 Bytes of RAM) options targeted for USB applications. Typical applications includes PC HID devices, joysticks, game pads, barcode scanners, POS terminals, consumer electronics, toys, remote controls, and security dongles.
Cypress Semiconductor products are on Mouser's Applications & Technologies Sites listed below. Select a category to learn about the latest applications and industry trends.